Software installation errors

[Prasanna Kumar-3]

Hi,

When ever i install or remove any software, i see following errors. Was upgraded ubuntu from 10.10 to 11.04 recently and seeing this error after upgrading. Please any one help me in resolving this error. Thanks in advance.

pkaX@pkax-ThinkPad-R400:~$ sudo apt-get install usermod
[sudo] password for pkaX:

Reading package lists... Done
Building dependency tree      
Reading state information... Done
Suggested packages:
  transmission-daemon transmission-gtk
The following NEW packages will be installed:
  transmission-cli
0 upgraded, 1 newly installed, 0 to remove and 81 not upgraded.
3 not fully installed or removed.
Need to get 924 kB of archives.
After this operation, 1,946 kB of additional disk space will be used.
Get:1 http://us.archive.ubuntu.com/ubuntu/ natty/universe transmission-cli i386 2.13-0ubuntu8 [924 kB]
Fetched 924 kB in 12s (76.3 kB/s)                                                                                                                           
Selecting previously deselected package transmission-cli.
(Reading database ... 237703 files and directories currently installed.)
Unpacking transmission-cli (from .../transmission-cli_2.13-0ubuntu8_i386.deb) ...
Processing triggers for man-db ...
Setting up samba4 (4.0.0~alpha15~git20110124.dfsg1-2ubuntu1) ...
Unknown parameter encountered: "max log size"
Ignoring unknown parameter "max log size"
Unknown parameter encountered: "syslog"
Ignoring unknown parameter "syslog"
Unknown parameter encountered: "passdb backend"
Ignoring unknown parameter "passdb backend"
Unknown parameter encountered: "unix password sync"
Ignoring unknown parameter "unix password sync"
Unknown parameter encountered: "passwd program"
Ignoring unknown parameter "passwd program"
Unknown parameter encountered: "pam password change"
Ignoring unknown parameter "pam password change"
Unknown parameter encountered: "map to guest"
Ignoring unknown parameter "map to guest"
Unknown parameter encountered: "usershare allow guests"
Ignoring unknown parameter "usershare allow guests"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "max log size"
Ignoring unknown parameter "max log size"
Unknown parameter encountered: "syslog"
Ignoring unknown parameter "syslog"
Unknown parameter encountered: "passdb backend"
Ignoring unknown parameter "passdb backend"
Unknown parameter encountered: "unix password sync"
Ignoring unknown parameter "unix password sync"
Unknown parameter encountered: "passwd program"
Ignoring unknown parameter "passwd program"
Unknown parameter encountered: "pam password change"
Ignoring unknown parameter "pam password change"
Unknown parameter encountered: "map to guest"
Ignoring unknown parameter "map to guest"
Unknown parameter encountered: "usershare allow guests"
Ignoring unknown parameter "usershare allow guests"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
WARNING: Module [samba_dsdb] not found - do you need to set LDB_MODULES_PATH?
Unable to load modules for /var/lib/samba/private/sam.ldb: (null)
Traceback (most recent call last):
  File "/usr/share/samba/setup/upgradeprovision", line 1597, in <module>
    ldbs = get_ldbs(paths, creds, session, lp)
  File "/usr/lib/python2.7/dist-packages/samba/upgradehelpers.py", line 159, in get_ldbs
    ldbs.sam = SamDB(paths.samdb, session_info=session, credentials=creds, lp=lp, options=["modules:samba_dsdb"])
  File "/usr/lib/python2.7/dist-packages/samba/samdb.py", line 53, in __init__
    options=options)
  File "/usr/lib/python2.7/dist-packages/samba/__init__.py", line 110, in __init__
    self.connect(url, flags, options)
  File "/usr/lib/python2.7/dist-packages/samba/samdb.py", line 66, in connect
    options=options)
_ldb.LdbError: (80, None)
dpkg: error processing samba4 (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of openchangeserver:
 openchangeserver depends on samba4 (>= 4.0.0~); however:
  Package samba4 is not configured yet.
dpkg: error processing openchangeserver (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of openchangeserver-dev:
 openchangeserver-dev depends on openchangeserver (= 1:0.11~bzr1932-1build1); however:
  Package openchangeserver is not configured yet.
dpkg: error processing openchangeserver-dev (--configure):
 dependency problems - leaving unconfigured
Setting up transmission-cli (2.13-0ubuntu8) ...
No apport report written because the error message indicates its a followup error from a previous failure.
                                                                                                          No apport report written because the error message indicates its a followup error from a previous failure.
                                                      Errors were encountered while processing:
 samba4
 openchangeserver
 openchangeserver-dev
E: Sub-process /usr/bin/dpkg returned an error code (1)

--
Regards,
Prasanna :-)

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[NoOp-4]

On 07/01/2011 08:28 PM, Prasanna Kumar wrote:

> Hi,
>
> When ever i install or remove any software, i see following errors. Was
> upgraded ubuntu from 10.10 to 11.04 recently and seeing this error after
> upgrading. Please any one help me in resolving this error. Thanks in
> advance.
>
> pkaX@pkax-ThinkPad-R400:~$ sudo apt-get install usermod
> [sudo] password for pkaX:
>
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> Suggested packages:
>   transmission-daemon transmission-gtk
> The following NEW packages will be installed:
>   transmission-cli
> 0 upgraded, 1 newly installed, 0 to remove and 81 not upgraded.
> 3 not fully installed or removed.

Try:

$ sudo apt-get install -f
$ sudo dpkg --configure -a
$ sudo apt-get update && apt-get upgrade





--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Ric Moore]

On Sat, 2011-07-02 at 08:58 +0530, Prasanna Kumar wrote:

> Hi,
>
> When ever i install or remove any software, i see following errors.
> Was upgraded ubuntu from 10.10 to 11.04 recently and seeing this error
> after upgrading. Please any one help me in resolving this error.
> Thanks in advance.
>
> pkaX@pkax-ThinkPad-R400:~$ sudo apt-get install usermod
> [sudo] password for pkaX:
>
> Reading package lists... Done
> Building dependency tree      
> Reading state information... Done
> Suggested packages:
>   transmission-daemon transmission-gtk
> The following NEW packages will be installed:
>   transmission-cli
> 0 upgraded, 1 newly installed, 0 to remove and 81 not upgraded.
> 3 not fully installed or removed.

Maybe do the upgrades and fix the damaged packages before you beat that
dead horse. Try using synaptic. Make it easy on yourself. <grins> :) Ric


--
My father, Victor Moore (Vic) used to say:
"There are two Great Sins in the world...
..the Sin of Ignorance, and the Sin of Stupidity.
Only the former may be overcome." R.I.P. Dad.
Linux user# 44256


--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Prasanna Kumar-3]

Hi,


Thanks for the reply... If i run the following command, i see the below error:

pkaX@pkax-ThinkPad-R400:~$ sudo apt-get install -f
Reading package lists... Done
Building dependency tree      
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 81 not upgraded.
3 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up samba4 (4.0.0~alpha15~git20110124.dfsg1-2ubuntu1) ...
Unknown parameter encountered: "max log size"
Ignoring unknown parameter "max log size"
Unknown parameter encountered: "syslog"
Ignoring unknown parameter "syslog"
Unknown parameter encountered: "passdb backend"
Ignoring unknown parameter "passdb backend"
Unknown parameter encountered: "unix password sync"
Ignoring unknown parameter "unix password sync"
Unknown parameter encountered: "passwd program"
Ignoring unknown parameter "passwd program"
Unknown parameter encountered: "pam password change"
Ignoring unknown parameter "pam password change"
Unknown parameter encountered: "map to guest"
Ignoring unknown parameter "map to guest"
Unknown parameter encountered: "usershare allow guests"
Ignoring unknown parameter "usershare allow guests"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "max log size"
Ignoring unknown parameter "max log size"
Unknown parameter encountered: "syslog"
Ignoring unknown parameter "syslog"
Unknown parameter encountered: "passdb backend"
Ignoring unknown parameter "passdb backend"
Unknown parameter encountered: "unix password sync"
Ignoring unknown parameter "unix password sync"
Unknown parameter encountered: "passwd program"
Ignoring unknown parameter "passwd program"
Unknown parameter encountered: "pam password change"
Ignoring unknown parameter "pam password change"
Unknown parameter encountered: "map to guest"
Ignoring unknown parameter "map to guest"
Unknown parameter encountered: "usershare allow guests"
Ignoring unknown parameter "usershare allow guests"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
WARNING: Module [samba_dsdb] not found - do you need to set LDB_MODULES_PATH?
Unable to load modules for /var/lib/samba/private/sam.ldb: (null)
Traceback (most recent call last):
  File "/usr/share/samba/setup/upgradeprovision", line 1597, in <module>
    ldbs = get_ldbs(paths, creds, session, lp)
  File "/usr/lib/python2.7/dist-packages/samba/upgradehelpers.py", line 159, in get_ldbs
    ldbs.sam = SamDB(paths.samdb, session_info=session, credentials=creds, lp=lp, options=["modules:samba_dsdb"])
  File "/usr/lib/python2.7/dist-packages/samba/samdb.py", line 53, in __init__
    options=options)
  File "/usr/lib/python2.7/dist-packages/samba/__init__.py", line 110, in __init__
    self.connect(url, flags, options)
  File "/usr/lib/python2.7/dist-packages/samba/samdb.py", line 66, in connect
    options=options)
_ldb.LdbError: (80, None)
dpkg: error processing samba4 (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of openchangeserver:
 openchangeserver depends on samba4 (>= 4.0.0~); however:
  Package samba4 is not configured yet.
dpkg: error processing openchangeserver (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of openchangeserver-dev:
 openchangeserver-dev depends on openchangeserver (= 1:0.11~bzr1932-1build1); however:
  Package openchangeserver is not configured yet.
dpkg: error processing openchangeserver-dev (--configure):
 dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
                          No apport report written because the error message indicates its a followup error from a previous failure.
                                                    Errors were encountered while processing:
 samba4
 openchangeserver
 openchangeserver-dev
E: Sub-process /usr/bin/dpkg returned an error code (1)

Is there any alternate way to install the same?

On Sat, Jul 2, 2011 at 9:17 AM, NoOp <[hidden email]> wrote:

On 07/01/2011 08:28 PM, Prasanna Kumar wrote:
> Hi,
>
> When ever i install or remove any software, i see following errors. Was
> upgraded ubuntu from 10.10 to 11.04 recently and seeing this error after
> upgrading. Please any one help me in resolving this error. Thanks in
> advance.
>
> pkaX@pkax-ThinkPad-R400:~$ sudo apt-get install usermod
> [sudo] password for pkaX:
>
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> Suggested packages:
>   transmission-daemon transmission-gtk
> The following NEW packages will be installed:
>   transmission-cli
> 0 upgraded, 1 newly installed, 0 to remove and 81 not upgraded.
> 3 not fully installed or removed.

Try:

$ sudo apt-get install -f
$ sudo dpkg --configure -a
$ sudo apt-get update && apt-get upgrade





--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

--
Regards,
Prasanna :-)

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[NoOp-4]

On 07/02/2011 03:27 AM, Prasanna Kumar wrote:

> Hi,
>
>
> Thanks for the reply... If i run the following command, i see the below
> error:
>
> pkaX@pkax-ThinkPad-R400:~$ sudo apt-get install -f
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> 0 upgraded, 0 newly installed, 0 to remove and 81 not upgraded.
> 3 not fully installed or removed.

...

>     options=options)
> _ldb.LdbError: (80, None)
> dpkg: error processing samba4 (--configure):
>  subprocess installed post-installation script returned error exit status 1
> dpkg: dependency problems prevent configuration of openchangeserver:
>  openchangeserver depends on samba4 (>= 4.0.0~); however:
>   Package samba4 is not configured yet.
> dpkg: error processing openchangeserver (--configure):
>  dependency problems - leaving unconfigured
> dpkg: dependency problems prevent configuration of openchangeserver-dev:
>  openchangeserver-dev depends on openchangeserver (=
> 1:0.11~bzr1932-1build1); however:
>   Package openchangeserver is not configured yet.
> dpkg: error processing openchangeserver-dev (--configure):
>  dependency problems - leaving unconfigured
> No apport report written because the error message indicates its a followup
> error from a previous failure.
>                           No apport report written because the error message
> indicates its a followup error from a previous failure.
>                                                     Errors were encountered
> while processing:
>  samba4
>  openchangeserver
>  openchangeserver-dev
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
> Is there any alternate way to install the same?

$ sudo apt-get purge samba4
$ sudo apt-get purge openchangeserver
$ sudo apt-get purge openchangeserver-dev
$ sudo apt-get update && sudo apt-get dist-upgrade

Then:
...
>>
>> $ sudo apt-get install -f
>> $ sudo dpkg --configure -a
...
And then you can try to reinstall samba4 & openchangeserver.



--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Prasanna Kumar-3]

Hi,

Thanks a lot for quick response.. After re-installing the samba4 by performing all the steps suggested by you, the softer installation and removal is going on smoothly without any error. It looks like the samaba4 problem is solved. Once again thanks a lot.

One more question i have, this is not related to this error. I am able to see one icon in the launcher and if i place the mouse it says "Install RELEASE". Do you have any idea what is this going to install? Am not sure will there be any problem if i install this. Thanks in advance..

Regards,
Prasanna.

On Sun, Jul 3, 2011 at 12:00 AM, NoOp <[hidden email]> wrote:

On 07/02/2011 03:27 AM, Prasanna Kumar wrote:
> Hi,
>
>
> Thanks for the reply... If i run the following command, i see the below
> error:
>
> pkaX@pkax-ThinkPad-R400:~$ sudo apt-get install -f
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> 0 upgraded, 0 newly installed, 0 to remove and 81 not upgraded.
> 3 not fully installed or removed.

...

>     options=options)
> _ldb.LdbError: (80, None)
> dpkg: error processing samba4 (--configure):
>  subprocess installed post-installation script returned error exit status 1
> dpkg: dependency problems prevent configuration of openchangeserver:
>  openchangeserver depends on samba4 (>= 4.0.0~); however:
>   Package samba4 is not configured yet.
> dpkg: error processing openchangeserver (--configure):
>  dependency problems - leaving unconfigured
> dpkg: dependency problems prevent configuration of openchangeserver-dev:
>  openchangeserver-dev depends on openchangeserver (=
> 1:0.11~bzr1932-1build1); however:
>   Package openchangeserver is not configured yet.
> dpkg: error processing openchangeserver-dev (--configure):
>  dependency problems - leaving unconfigured
> No apport report written because the error message indicates its a followup
> error from a previous failure.
>                           No apport report written because the error message
> indicates its a followup error from a previous failure.
>                                                     Errors were encountered
> while processing:
>  samba4
>  openchangeserver
>  openchangeserver-dev
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
> Is there any alternate way to install the same?

$ sudo apt-get purge samba4
$ sudo apt-get purge openchangeserver
$ sudo apt-get purge openchangeserver-dev
$ sudo apt-get update && sudo apt-get dist-upgrade

Then:
...

>>
>> $ sudo apt-get install -f
>> $ sudo dpkg --configure -a

...
And then you can try to reinstall samba4 & openchangeserver.



--

ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

--
Regards,
Prasanna :-)

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[NoOp-4]

On 07/03/2011 01:19 AM, Prasanna Kumar wrote:
> Hi,
>
> Thanks a lot for quick response.. After re-installing the samba4 by
> performing all the steps suggested by you, the softer installation and
> removal is going on smoothly without any error. It looks like the samaba4
> problem is solved. Once again thanks a lot.

Great. You're most welcome.

>
> One more question i have, this is not related to this error. I am able to
> see one icon in the launcher and if i place the mouse it says "Install
> RELEASE". Do you have any idea what is this going to install? Am not sure
> will there be any problem if i install this. Thanks in advance..

Not sure exactly what icon you are referring to. You already upgraded
from 10.10 to 11.04, so I know of no other release (except for ocelot)
that it would be wanting to upgrade to. Did you do *all* of the steps
that I pointed out in my previous? It could be that because you had 81
upgrades to still do, that some of those will result in only a 'partial
release/upgrade'. So you'll need to keep going through them until you
are fully upgraded.

...
Please bottom post on this list (meaning put your reply at the end, or
intersperse your reply).




--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Prasanna Kumar-3]

On Mon, Jul 4, 2011 at 2:48 AM, NoOp <[hidden email]> wrote:

On 07/03/2011 01:19 AM, Prasanna Kumar wrote:
> Hi,
>

> Thanks a lot for quick response.. After re-installing the samba4 by
> performing all the steps suggested by you, the softer installation and
> removal is going on smoothly without any error. It looks like the samaba4
> problem is solved. Once again thanks a lot.

Great. You're most welcome.

>
> One more question i have, this is not related to this error. I am able to
> see one icon in the launcher and if i place the mouse it says "Install
> RELEASE". Do you have any idea what is this going to install? Am not sure
> will there be any problem if i install this. Thanks in advance..

Not sure exactly what icon you are referring to. You already upgraded
from 10.10 to 11.04, so I know of no other release (except for ocelot)
that it would be wanting to upgrade to. Did you do *all* of the steps
that I pointed out in my previous? It could be that because you had 81
upgrades to still do, that some of those will result in only a 'partial
release/upgrade'. So you'll need to keep going through them until you
are fully upgraded.

...
Please bottom post on this list (meaning put your reply at the end, or
intersperse your reply).




--

ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Hi,

Was not able to share the screen shots as the size is high. Am attaching only one screen shot which is having the icon which am referring to. Hope this may give some clue to you.

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[NoOp-4]

On 07/04/2011 09:55 AM, Prasanna Kumar wrote:
...
> Hi,
>
> Was not able to share the screen shots as the size is high. Am attaching
> only one screen shot which is having the icon which am referring to. Hope
> this may give some clue to you.

Unfortunately I don't know. You could click it & find out. But first,
what is the output of:

$ sudo apt-get update && sudo apt-get upgrade




--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Prasanna Kumar-3]

On Tue, Jul 5, 2011 at 12:50 AM, NoOp <[hidden email]> wrote:

On 07/04/2011 09:55 AM, Prasanna Kumar wrote:
...
> Hi,
>

> Was not able to share the screen shots as the size is high. Am attaching
> only one screen shot which is having the icon which am referring to. Hope
> this may give some clue to you.

Unfortunately I don't know. You could click it & find out. But first,
what is the output of:

$ sudo apt-get update && sudo apt-get upgrade




--

ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Hi,

Following is the output of the command:

pkaX@pkax-ThinkPad-R400:~$ sudo apt-get update && sudo apt-get upgrade
[sudo] password for pkaX:
Ign http://security.ubuntu.com natty-security InRelease                       
Ign http://us.archive.ubuntu.com natty InRelease                              
Ign http://us.archive.ubuntu.com natty-updates InRelease           
Ign http://extras.ubuntu.com natty InRelease                        
Ign http://archive.canonical.com natty InRelease                    
Hit http://security.ubuntu.com natty-security Release.gpg           
Hit http://us.archive.ubuntu.com natty Release.gpg                  
Hit http://archive.canonical.com natty Release.gpg                  
Get:1 http://extras.ubuntu.com natty Release.gpg [72 B]             
Hit http://us.archive.ubuntu.com natty-updates Release.gpg          
Hit http://security.ubuntu.com natty-security Release               
Hit http://archive.canonical.com natty Release                      
Hit http://extras.ubuntu.com natty Release                          
Hit http://us.archive.ubuntu.com natty Release                                
Hit http://security.ubuntu.com natty-security/main Sources                    
Hit http://archive.canonical.com natty/partner Sources                        
Hit http://extras.ubuntu.com natty/main Sources                     
Hit http://us.archive.ubuntu.com natty-updates Release              
Hit http://security.ubuntu.com natty-security/restricted Sources              
Hit http://security.ubuntu.com natty-security/universe Sources                
Hit http://security.ubuntu.com natty-security/multiverse Sources              
Hit http://security.ubuntu.com natty-security/main i386 Packages              
Hit http://security.ubuntu.com natty-security/restricted i386 Packages        
Hit http://archive.canonical.com natty/partner i386 Packages                  
Ign http://archive.canonical.com natty/partner TranslationIndex               
Hit http://extras.ubuntu.com natty/main i386 Packages                         
Ign http://extras.ubuntu.com natty/main TranslationIndex            
Hit http://us.archive.ubuntu.com natty/main Sources                 
Hit http://us.archive.ubuntu.com natty/restricted Sources           
Hit http://us.archive.ubuntu.com natty/universe Sources                       
Hit http://us.archive.ubuntu.com natty/multiverse Sources                     
Hit http://us.archive.ubuntu.com natty/main i386 Packages           
Hit http://security.ubuntu.com natty-security/universe i386 Packages          
Hit http://security.ubuntu.com natty-security/multiverse i386 Packages        
Ign http://security.ubuntu.com natty-security/main TranslationIndex           
Ign http://security.ubuntu.com natty-security/multiverse TranslationIndex     
Ign http://security.ubuntu.com natty-security/restricted TranslationIndex     
Ign http://security.ubuntu.com natty-security/universe TranslationIndex
Hit http://us.archive.ubuntu.com natty/restricted i386 Packages     
Hit http://us.archive.ubuntu.com natty/universe i386 Packages       
Hit http://us.archive.ubuntu.com natty/multiverse i386 Packages     
Ign http://us.archive.ubuntu.com natty/main TranslationIndex        
Ign http://us.archive.ubuntu.com natty/multiverse TranslationIndex  
Ign http://us.archive.ubuntu.com natty/restricted TranslationIndex  
Ign http://us.archive.ubuntu.com natty/universe TranslationIndex              
Hit http://us.archive.ubuntu.com natty-updates/main Sources                   
Hit http://us.archive.ubuntu.com natty-updates/restricted Sources   
Hit http://us.archive.ubuntu.com natty-updates/universe Sources     
Hit http://us.archive.ubuntu.com natty-updates/multiverse Sources             
Hit http://us.archive.ubuntu.com natty-updates/main i386 Packages             
Hit http://us.archive.ubuntu.com natty-updates/restricted i386 Packages
Hit http://us.archive.ubuntu.com natty-updates/universe i386 Packages
Hit http://us.archive.ubuntu.com natty-updates/multiverse i386 Packages       
Ign http://us.archive.ubuntu.com natty-updates/main TranslationIndex          
Ign http://us.archive.ubuntu.com natty-updates/multiverse TranslationIndex
Ign http://us.archive.ubuntu.com natty-updates/restricted TranslationIndex    
Ign http://us.archive.ubuntu.com natty-updates/universe TranslationIndex      
Ign http://archive.canonical.com natty/partner Translation-en_US              
Ign http://extras.ubuntu.com natty/main Translation-en_US                     
Ign http://archive.canonical.com natty/partner Translation-en                 
Ign http://extras.ubuntu.com natty/main Translation-en                        
Ign http://security.ubuntu.com natty-security/main Translation-en_US          
Ign http://security.ubuntu.com natty-security/main Translation-en             
Ign http://us.archive.ubuntu.com natty/main Translation-en_US                 
Ign http://us.archive.ubuntu.com natty/main Translation-en                    
Ign http://us.archive.ubuntu.com natty/multiverse Translation-en_US           
Ign http://us.archive.ubuntu.com natty/multiverse Translation-en              
Ign http://security.ubuntu.com natty-security/multiverse Translation-en_US    
Ign http://security.ubuntu.com natty-security/multiverse Translation-en       
Ign http://security.ubuntu.com natty-security/restricted Translation-en_US    
Ign http://us.archive.ubuntu.com natty/restricted Translation-en_US           
Ign http://us.archive.ubuntu.com natty/restricted Translation-en              
Ign http://us.archive.ubuntu.com natty/universe Translation-en_US             
Ign http://security.ubuntu.com natty-security/restricted Translation-en       
Ign http://security.ubuntu.com natty-security/universe Translation-en_US      
Ign http://security.ubuntu.com natty-security/universe Translation-en         
Ign http://us.archive.ubuntu.com natty/universe Translation-en                
Ign http://us.archive.ubuntu.com natty-updates/main Translation-en_US         
Ign http://us.archive.ubuntu.com natty-updates/main Translation-en            
Ign http://us.archive.ubuntu.com natty-updates/multiverse Translation-en_US   
Ign http://us.archive.ubuntu.com natty-updates/multiverse Translation-en      
Ign http://us.archive.ubuntu.com natty-updates/restricted Translation-en_US   
Ign http://us.archive.ubuntu.com natty-updates/restricted Translation-en      
Ign http://us.archive.ubuntu.com natty-updates/universe Translation-en_US     
Ign http://us.archive.ubuntu.com natty-updates/universe Translation-en        
Fetched 72 B in 10s (7 B/s)                                                   
Reading package lists... Done
Reading package lists... Done
Building dependency tree      
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[NoOp-4]

On 07/04/2011 09:19 PM, Prasanna Kumar wrote:

> On Tue, Jul 5, 2011 at 12:50 AM, NoOp <[hidden email]> wrote:
>
>> On 07/04/2011 09:55 AM, Prasanna Kumar wrote:
>> ...
>> > Hi,
>> >
>> > Was not able to share the screen shots as the size is high. Am attaching
>> > only one screen shot which is having the icon which am referring to. Hope
>> > this may give some clue to you.
>>
>> Unfortunately I don't know. You could click it & find out. But first,
>> what is the output of:
>>
>> $ sudo apt-get update && sudo apt-get upgrade

...
> Reading package lists... Done
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Appears to be all in order. I reckon you can go ahead & click on the
icon to find out what it is.



--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Alan Pope-2]

On 4 July 2011 17:55, Prasanna Kumar <[hidden email]> wrote:
> Was not able to share the screen shots as the size is high. Am attaching
> only one screen shot which is having the icon which am referring to. Hope
> this may give some clue to you.

That's ubiquity, the Ubuntu installer. You don't want to run that on a
system that is already installed. Indeed Ubiquity shouldn't even be
installed on your system.

Al.

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[EnvyGeeks]

On 07/05/2011 01:52 PM, Alan Pope wrote:
> That's ubiquity, the Ubuntu installer. You don't want to run that on a
> system that is already installed. Indeed Ubiquity shouldn't even be
> installed on your system.

This could be wrong but, I believe some sub-Ubuntu-distros (like
Elementary OS which is still Ubuntu at it's heart) keep it on there
because they might have some customisations to it that allow upgrades
and on the fly distro makes?  I know running over my Elementary OS test
install it does have ubiquity still.


--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Alan Pope-2]

On 5 July 2011 20:28, Jordon Bedwell <[hidden email]> wrote:
> This could be wrong but, I believe some sub-Ubuntu-distros (like
> Elementary OS which is still Ubuntu at it's heart) keep it on there
> because they might have some customisations to it that allow upgrades
> and on the fly distro makes?  I know running over my Elementary OS test
> install it does have ubiquity still.
>

Interesting, thanks.

Al.

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

[Prasanna Kumar-3]

On Wed, Jul 6, 2011 at 1:15 AM, Alan Pope <[hidden email]> wrote:

On 5 July 2011 20:28, Jordon Bedwell <[hidden email]> wrote:
> This could be wrong but, I believe some sub-Ubuntu-distros (like
> Elementary OS which is still Ubuntu at it's heart) keep it on there
> because they might have some customisations to it that allow upgrades
> and on the fly distro makes?  I know running over my Elementary OS test
> install it does have ubiquity still.
>

Interesting, thanks.

Al.

--
ubuntu-users mailing list
[hidden email]

Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Hi,

Thanks a lot for the answers.

Regards,
Prasanna.

--
ubuntu-users mailing list
[hidden email]
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users